員工必備的十條安全黃金原則

十條安全黃金準則

準則一  我們每個人都有權利和義務阻止一切不安全行為

We each have the right and duty to stop any unsafe activity Each of us the

在危險的條件下我們可以拒絕工作

We are expected to refuse to work in dangerous conditions

對不安全的條件和行為,我們必須立即向上匯報

We must immediately report unsafe conditions or acts to our supervisor And

我們的安全要互相負責

We are responsible for each other’s safety

上崗前一定要培訓

Do not do a job before being trained

準則二 工作時使用合適的工具

Use the right tool for the job your

使用專門為手上干的活而設計的正確的器具

Use only the proper equipment designed for the job at hand

每天檢查你的工具,不要使用有缺陷的工具或器具

Inspect your tools daily. Do not work with defective tools or equipment

對新的工作和上級一起設計正確的方法

On new jobs, plan the proper method with your supervisor

嚴禁超載使用工具,器具或機器

Never overload tools, equipment or machines

準則三 永遠使用工作所需的安全設施

Always use the safety equipment required for the job

必須自始至終穿戴工作所需的個人防護用品

Personal Protection Equipment required for the job must be worn all the time

嚴禁損壞或取消安全裝置或安全擋板

Never disable or bypass a safety device or safety barrier

每天檢查個人防護用品,發現有壞的,替換掉

Check PPE daily and replace any faulty items The

準則四 對所有事故要立即響應

Act on all accidents immediately

使事故地區恢復安全: 排除危險

Make the area safe: remove the danger

急救及正確的醫療處理

Get first aid and proper medical care

必須準確地記錄和匯報所發生的經過

Accurate recording and reporting of the facts must be done

讓所有的員工了解事故

Communicate the findings to all

準則五 小心重物

Beware of heavy objects

提升重物時,使用正確的設備,不要超載

When lifting, use the right equipment, and do not overload it

提升或搬運重物時,要有足夠的,合適的幫助

Get enough, qualified help when lifting or moving heavy things

人在提升重物時,要學會正確的方法,必要時使用個人防護用品

In manual lifting, learn the right way to lift, and use PPE when required

不要站在會有東西掉下來的地方

Avoid being where things can fall on you

準則六 注意旋轉的機器設備

Beware of rotating machinery

確保旋轉的機器有防護罩或擋板

Make sure that rotating tools are guarded with shields or barriers

沒有防護罩或擋板時,千萬要注意,不要碰到旋轉部分

When that is not possible, use great caution never to come into contact with a rotating part

在旋轉或活動的部件上工作時,要事先確保已安全鎖定,并且不會意外開動

fore working on a part that rotates or moves, make sure that it is safely locked out and of cannot be started accidentally

準則七 小心行走 避免滑倒和摔倒

Tread with Care! Avoid Slips and Falls

高空作業或在高于1.8米處作業,要使用正確的安全器具

At heights, or over openings of over 1,8m or 6ft, use the correct safety equipment

走,不要跑

Walk, don’t run

準則八 眼睛需要特別的保護

Eyes need Special Protection

對眼睛有危險的地方,要戴上護目鏡

Use glasses with side shields where there is any risk at all

使用化學品時，要與眼睛保持足夠距離

Use fully enclosed goggles when grinding iron and steel, and where there is a risk of grease or fluids damaging the eye

焊接時,要戴好電焊面罩

Use full face welding masks for welding

準則九 特別注意你的工作所特有的危險

Take special care for the risks that are special to your job

要格外注意高溫爐子和高壓容器,要遵守操作規程

Use extra caution with high temperature furnaces and high pressure vessels: follow the rules

Be caution with

對任何在你的工作場所使用的危險物品,要確保知道正確的處理方法

Make sure you know the proper way to handle any hazardous substances used in your workplace

要一直學習并不折不扣地遵守礦山和工廠的規章制度

On mines and in factories, learn the rules and follow them exactly, all the tim Learn and follow the rules

有爆炸性氣體(如甲烷)的地方,要極其注意其危險

Use extreme caution when there is a danger of explosive gases (e.g. methane) being present Where the explosive gases are being used.

準則十 交通安全

Traffic Safety

每天檢查車輛,確保車輛處于安全的工作狀態

Inspect the vehicle daily to confirm that it is in safe working order

駕駛員必須經公司批準同意,并有相應的駕駛證

he driver must be authorized and licensed to drive the class of vehicle The vehicle of class

所有乘客必須系上安全帶,沒有安全帶就不能坐車

All occupants must wear seat belts: no belt, no ride